How to inject default route in RIP

rip lab

 

 

 

 

How to inject default route in RIP

Objective : R1 is acting as the ISP and R2 is the Edge Router for a company that is running RIP internally between R2, R3 and R4. R1 will have static routes towards all the company networks. R2 will have a default route pointing towards R1.

Follow the below configuration or Watch the Video tutorial at the end of this post

injecting default route

 

On R1
R1#conf t

R1(config)#ip route 2.0.0.0 255.0.0.0 192.1.12.2

R1(config)#ip route 3.0.0.0 255.0.0.0 192.1.12.2

R1(config)#ip route 4.0.0.0 255.0.0.0 192.1.12.2

R1(config)#ip route 192.1.23.0 255.255.255.0 192.1.12.2

R1(config)#ip route 192.1.34.0 255.255.255.0 192.1.12.2

On R2

R2#conf t

R2(config)# ip route 0.0.0.0 0.0.0.0 192.1.12.1

R2(config)#Router RIP

R2(config-router)#no auto-summary

R2(config-router)#net 2.0.0.0

R2(config-router)#net 192.1.12.0

R2(config-router)#net 192.1.23.0

On R3

R3#conf t

R3(config)#Router RIP

R3(config-router)#no auto-summary

R3(config-router)#net 3.0.0.0

R3(config-router)#net 192.1.23.0

R3(config-router)#net 192.1.34.0

On R4

R4#conf t

R4(config)#Router RIP

R4(config-router)#no auto-summary

R4(config-router)#net 4.0.0.0

R4(config-router)#net 192.1.34.0

 

Type Show IP route and share the result

Watch Video tutorial

 

Leave a Reply